SILVER METALLIC CARPET DYE

Carpet, vinyl, and plastic dyes are available in various colours, matched to O.E.M. colouring standards. Use to restore automotive carpet, vinyl and plastic. Specially formulated to leave the carpet and vinyl soft and flexible, with a permanent coating that will not crack, split, peel, or rub off.

PRODUCT CODE: R27102

AVAILABLE SIZES:

body-image
319 G / 11.25 OZ
R27102
Join our newsletter list to get the latest news and updates.

TYPICAL DATA

APPEARANCE: Silver metallic.
SPECIFIC GRAVITY: ~0.83 g/ml
ODOUR: Solvent.
SOLUBILITY: Insoluble in water.
% NON-VOLATILE: ~ 47%
FLASH POINT: -97°C

Benefits

  • Colour matched to O.E.M. colouring standards
  • Restore automotive carpet, vinyl, and plastic
  • Leaves carpet and vinyl soft and flexible
  • Permanent coating that will not crack, split, peel, or rub off
  • Ready to use aerosol container

Training

Increase your knowledge and expand your expertise. Discover training series related to this product, to help you produce optimal detailing results, and to keep yourself and others safe.

Videos

Introduction to Detailer Training Series Course

When detailing a vehicle, producing results correctly, safely, and effectively is crucial, especially in the professional detailing industry.

FREQUENTLY ASKED QUESTIONS

It is recommended to test spray in an inconspicuous area or on a scrap piece of material to verify compatibility before using a Carpet, Vinyl, and Plastic Dye. For best results always use a Carpet, Vinyl, and Plastic Dye at room temperature.

A wide range of Carpet, Vinyl, and Plastic Dyes are available. They include: doeskin, khaki, light grey, dove grey, grey, silver metallic, carbon grey, dark grey metallic, dark grey, charcoal grey, and black.

The Carpet, Vinyl, and Plastic Dyes are ideal to restore automotive carpet, vinyl and plastic. Carpet, Vinyl, and Plastic Dyes are specially formulated to leave the carpet and vinyl soft and flexible, and contains a permanent coating that will not crack, split, peel, or rub off. Available in over 10 colours matched to O.E.M. colouring standards.

If the carpet dye aerosol spray button becomes clogged, pull it off and clean it. Do not stick pins or wire into the can opening. Replace the spray button with the valve opening pointing away from you.

Direction Of Use

  1. Prepare the surface of the application. Remove dirt, silicone, grease, and grime. Rinse the area with clean water and dry thoroughly with a clean cloth before refinishing. Protect adjacent surfaces from overspray.
  2. Shake well before and during use; shake for 2 minutes after the ball within the aerosol begins to rattle. Repeat this step for 10 seconds after each minute of use.
  3. For a professional finish, spray 10 to 25 cm from the area of application, in a sweeping motion. Avoid runs and drips by applying several light coats. Allow at least 5 minutes between coats, if required.
  4. Clean spray valve immediately after use; to clean turn aerosol upside down and spray until clear
Tips: If the spray button becomes clogged, pull off and clean - do not stick pins or wire into the can opening. Replace the spray button with the valve opening pointing away from you.

Precaution: Test spray in an inconspicuous area or on a scrap piece of material to verify compatibility. Use at room temperature (20°C) for best results. Extremely flammable, keep away from open flames or sources of ignition; do not burn, incinerate or puncture container. Keep away from temperatures above 50°C. Do not mix with other chemicals. Keep from freezing.

Specifications

  • Ready to Use Aerosol
  • Body Shop safe
  • Electric/Hybrid Vehicle Friendly
  • Silicone Free