STEP 1: PREPARE THE AREAS OF APPLICATION

Ensure the areas of application are free from dust, debris, and pet hair; and interior stains and salt deposits are removed.
For stain removal on plastic and vinyl surfaces, begin by stain spotting with PURPLE POWER or GREASE TERMINATOR (water-based cleaners) diluted. To dilute PURPLE POWER; 1 part PURPLE POWER to 10 parts water (1:10). To dilute GREASE TERMINATOR; 1 part GREASE TERMINATOR per 40 parts water (1:40). Spray the diluted water-based cleaner solution onto the stained areas and follow by rinsing.
For more intense stains on plastic and vinyl surfaces, including permanent marker, pen, and adhesives, use either SUPER-O or SUPER SOL (solvent-based cleaners). Ensure the areas of application are dry. Spray the solvent-based cleaner of choice onto the stain and allow it to dwell for 10 to 15 seconds before wiping it off. Before applying SUPER-O or SUPER SOL, ensure to test the surface material in an inconspicuous area for colour fastness.

STEP 2: APPLY THE CLEANER

Use a spray bottle and a trigger sprayer nozzle, or the black super twister cleaning gun. Evenly spray DEEP CLEAN onto the areas of application. Allow DEEP CLEAN to dwell for 1 to 2 minutes; however, do not allow it to dry. Agitate the areas of application using a detailing brush or microfiber towel pre-moistened with DEEP CLEAN. Use an air gun to gently blow all the DEEP CLEAN into and along the seams and cracks; working in one direction, blowing dirt into a microfiber towel.

STEP 3: DRY THE AREAS OF APPLICATION

Buff the areas of application with a dry microfiber towel to remove the excess cleaner and to fully dry. Review your work. If necessary, touch up any missed areas by repeating steps 2 to 3. After interior hard surfaces are cleaned, it is best to dress and protect these areas (see the interior hard surface dress and protect task). Use steering wheel covers to protect and prolong the clean steering wheel from accumulating dirt and grime.

 

Tips

• Use SUPER-O or SUPER SOL for scuffs and discolouration on lighter colour vinyl, and to pretreat stains. Before applying SUPER-O or SUPER SOL, ensure to test the surface material in an inconspicuous area for colour fastness.
• For intense stains, pretreat using PURPLE POWER diluted; 1 part PURPLE POWER to 10 parts water (1:10).
• Do not use DEEP CLEAN on suede or rough leather. Ensure to test all surfaces in an inconspicuous area for colour fastness.
• To protect and maximize appearance, apply (1) SOFT TOUCH to condition cleaned leather surfaces, (2) a water-based dressing and protectant to interior hard surface areas, and (3) PARADE to woodgrain and chrome surfaces.
• Be sure to carefully read and follow all product instructions and precautions, on the product labels.

FREQUENTLY ASKED QUESTIONS