24
Detailing Area Clean
Maintaining the floors of the detailing area increases efficient work conditions, safety, and appearance.
Use CONC-KLEEN to effortlessly maintain the detailing area. As a concentrated powdered floor degreaser, CONC-KLEEN easily removes grease, oil, and undercoating from asphalt and concrete floors. CONC-KLEEN is safe on rubber, vinyl, and stainless steel surfaces. Dilute and apply CONC-KLEEN based on the intensity of soiling.
View the products used tab for Auto Valet products and accessories relating to this detailing task.
AREAS OF APPLICATION
Concrete or Asphalt Floor
PRODUCTS USED
PRODUCTS USED
Detailing task 24: Detailing Area Clean
.jpg)
-(web).jpg)
.jpg)
Directions
METHOD 1: HEAVILY SOILED FLOORS
STEP 1: APPLY THE POWDERED CLEANER
Wet the floor. Sprinkle CONC-KLEEN evenly over the soiled areas. Allow CONC-KLEEN to dwell on the floor for five minutes. Scrub if necessary.STEP 2: RINSE AND SQUEEGEE AREAS OF APPLICATION
Rinse the areas of application thoroughly using a pressure washer. Squeegee the rinse water into a drain.METHOD 2: AVERAGE SOILED FLOORS
STEP 1: DILUTE THE POWDERED CLEANER
Dilute 7-20 grams of CONC-KLEEN per 1 litre of hot water.STEP 2: APPLY THE DILUTED POWDERED CLEANER
Apply the diluted CONC-KLEEN solution onto the soiled floor area either manually using a scrub brush, or with a pressure washer. Allow CONC-KLEEN to dwell on the floor surfaces for five minutes.STEP 3: RINSE AND SQUEEGEE AREAS OF APPLICATION
Rinse the areas of application thoroughly using a pressure washer. Squeegee the rinse water into a drain.Tips
- Do not use CONC-KLEEN on painted, aluminum, or terrazzo surfaces.
- Be sure to carefully read and follow all product instructions and precautions, on the product labels.
FREQUENTLY ASKED QUESTIONS
CONC-KLEEN is ideal for use in industrial zones or in garages. Sprinkle CONC-KLEEN on the soiled surface, wet the surface with a garden hose, and wait for 5 minutes to allow it to work. Then scrub the surface if necessary. You can mix together a solution of CONC-KLEEN with either a pressure hose or manually. Once the cleaning is done, rinse thoroughly to wash off the residue.
CONC-KLEEN is designed to be used on concrete and asphalt floor types. It can be applied to other surfaces types; however, is not to be used on aluminum, painted, or terrazzo surfaces.
As a powdered cleaner and degreaser, CONC-KLEEN easily removes grease, oil, and undercoating from shop floors. Follow the product instructions for your application requirements when applying.
Powdered cleaners and degreasers can be sprinkled evenly over soiled areas, on a pre-wetted floor. Additionally, they can also be applied to the areas of applications after being diluted with water. Liquid cleaners and degreasers can be sprayed, brushed, or wiped onto the areas of application, after any needed diluting with water.