14
Convertible Roof Care
Cloth, fabric, and vinyl convertible roofs are susceptible to gathering dirt and debris and require special care to be cleaned safely. To best care for and clean convertible roofs use CRYSTAL FOAM to develop a rich lather that lifts and encapsulates soils, and prevents re-depositing. CRYSTAL FOAM dries to a brittle crystal that vacuums out easily.
The time to care for the convertible roof is dependent on the total surface area of the roof, the intensity and amount of dirtiness, and whether or not a wet-dry vacuum is used. Once the convertible roof care is complete, the roof will be left clean and free from dirt.
Safety supplies include goggles, an apron, and impervious gloves. You will require a vacuum to complete this task. If possible, use a wet-dry vacuum to decrease the drying time by removing excess wet product. View the products used tab for Auto Valet products and accessories relating to this detailing task.
AREAS OF APPLICATION
Cloth or Fabric Convertible Roof
PRODUCTS USED
PRODUCTS USED
Detailing task 14: Convertible Roof Care
.jpg)
-(web).jpg)
-(web).jpg)
-(web).jpg)
-(web).jpg)
-(web).jpg)
.jpg)
.jpg)
Directions
STEP 1: PREPARE THE AREAS OF APPLICATION AND SHAMPOO
Ensure the convertible rooftop is fully closed. Dilute 70 mL of CRYSTAL FOAM per 1 L of water (1:15). Whip the diluted CRYSTAL FOAM into a dense foam, or use a foam cleaning gun to produce a thick lather. If using the CRYSTAL FOAM aerosol, shake the aerosol can before use and do not dilute.STEP 2: APPLY THE SHAMPOO
Using a soft brush, transfer the foam from the CRYSTAL FOAM mixture onto the convertible rooftop. Using a soft scrub brush, scrub the foam gently, covering the entire surface area of the convertible rooftop. If using the CRYSTAL FOAM aerosol, hold the can 15 cm (6”) away from the area of application. Apply to an area of 60 cm (24”) at a time. Brush the area of application briskly using a soft scrub brush.STEP 3: ALLOW TO DRY AND VACUUM THE AREAS OF APPLICATION
If a wet vacuum is available, use it to remove residue. Allow the applied CRYSTAL FOAM to dry. Vacuum the dried CRYSTAL FOAM from the treated areas. If using the CRYSTAL FOAM aerosol, wipe with a clean, dry, lint-free microfiber towel.STEP 4: REVIEW YOUR WORK
Review work, and if necessary, touch up any missed areas by repeating steps 2 to 3.Tips
- Ensure to test all fabrics in an inconspicuous area for colour fastness before use.
- Do not use a scrub brush on vinyl windows, as it may scratch.
- Be sure to carefully read and follow all product instructions and precautions, on the product labels.
FREQUENTLY ASKED QUESTIONS
CRYSTAL FOAM aerosols are available in two options; regular and inverted. The options showcase the nozzle usage. For the regular aerosol nozzle, use the aerosol with the nozzle upright, at the top of the aerosol container. The regular nozzle is best used for the back of seats and headliners. For the inverted aerosol nozzle, use the aerosol with the nozzle upside, at the bottom of the aerosol container. The inverted aerosol nozzle is best used for carpets, where the aerosol is used upside down.
Use CRYSTAL FOAM, an upholstery shampoo, along with a soft scrub brush to clean either a cloth or fabric convertible roof.